BEYMA CD-101Nd/PK

https://42.audio/web/image/product.template/11634/image_1920?unique=24e070f

BEYMA CD-101Nd/PK — 1" / 1 inch · Compression Driver · Tweeter / HF Driver · Neodymium Magnet
40 W AES - 2000 – 20000 Hz - 8 Ω
Part no.: 42A-CHS-KD-BEY-0027

100.00 € 100.0 EUR 100.00 €

Price on request

inkl. MwSt. · Versandkostenfrei innerhalb Deutschlands
  • Manufacturer
  • Category
  • Series
  • Magnet
  • Impedance (Ω)
  • Power handling (W)
  • Frequency from (Hz)
  • Frequency to (Hz)
  • Diameter
  • Voice coil (inch)
  • Mounting depth (mm)
  • Weight (kg)
  • Fs (Hz)
  • BL (Tm)

This combination does not exist.

Wir melden uns innerhalb von 24 h – Angebot 48 h gültig.
Danke! Wir prüfen deinen Zielpreis und melden uns schnellstens.
  1. Home
  2. Driver shop
  3. Compression Drivers
  4. BEYMA CD-101Nd/PK

BEYMA CD-101Nd/PK — 1" · Compression Driver · Neodymium-Magnet

40 W AES · Frequency range 2000 Hz – 20000 Hz

Technical data

  • Diameter: 1 "
  • Voice coil: 1.1 "
  • Power handling: 40 W AES
  • Impedance: 8 Ω
  • Magnet: Neodymium
  • Weight: 0.3 kg
  • Mounting depth: 44 mm
  • Frequency range: 2000 – 20000 Hz

Series: CD · Part no.: 42A-CHS-KD-BEY-0027

Beyma CD-101Nd/PK: 1" neodymium compression driver at 0.3 kg and 44 mm depth

Light, shallow, 1" throat: the Beyma CD-101Nd/PK is the neodymium version of the small CD-101 driver and weighs just 0.3 kg. Its mounting depth of 44 mm makes it attractive for slim tops, ceiling speakers and columns where there is hardly any room behind the horn. Nominal impedance 8 Ω, power handling 40 W AES, frequency range 2,000 to 20,000 Hz.

The voice coil measures 1.1" and resonance sits at 2,000 Hz. Both facts place the driver firmly in the pure-tweeter class: it is not built for low crossover points but for clean highs above an 8" or 10" mid-woofer in a two-way design. The force factor of 3 Tm is appropriate for such a small motor; the neodymium magnet delivers it at far lower mass than a comparable ferrite ring, which is why the ferrite version CD-101Fe/PK is noticeably heavier. The /PK code identifies the diaphragm variant; the sister version CD-101Nd/PT is electrically identical.

Use and enclosure

Wherever weight counts, the CD-101Nd/PK earns its place: portable small PA, installations on light trusses or ceilings, active monitors with limited internal space. The 1" throat fits Beyma horns from the Horns & Waveguides category as well as documented 1" horns such as the 18Sound XT1086 Alu, XG10 Alu or Celestion H1SC-9040. A waveguide with wide coverage is often a better choice here than a long horn, because the driver is crossed high anyway and does not need deep horn loading.

The crossover frequency belongs clearly above the 2,000 Hz resonance, with a steep high-pass. The 40 W AES rating is a thermal continuous figure for filtered operation; the small 1.1" coil will not tolerate low-frequency misuse. In a passive design you attenuate the driver with an L-pad to match the woofer and add a series capacitor; with DSP a properly set high-pass plus limiter is sufficient.

What to look out for

  • Neodymium magnet, only 0.3 kg: ideal when every gram on the truss or ceiling matters.
  • Mounting depth 44 mm: fits slim cabinets where a ferrite driver no longer goes.
  • 1.1" voice coil: pure tweeter, cross over clearly above 2,000 Hz.
  • 8 Ω and 40 W AES: any small PA or hi-fi amplifier is sufficient, the crossover protects.
  • 1" throat: fits Beyma, 18Sound and Celestion horns with a 1" connection.

Frequently asked questions

Is the CD-101Nd/PK enough for a small 2-way PA box?

For speech, conference and small stages yes, provided the crossover sits well above 2,000 Hz and the high-pass is steep. For loud music with a lower crossover you are better off with a driver with a larger coil such as the CD-10Nd/N.

What does neodymium gain over the ferrite version?

The magnet is much lighter and more compact for the same field strength, which is why the driver weighs only 0.3 kg and is just 44 mm deep. The electrical data, 8 Ω, 40 W AES and 2,000 to 20,000 Hz, are comparable with the ferrite version CD-101Fe/PK; you are mainly paying for the weight saving.

Which horn fits the CD-101Nd/PK?

Any horn or waveguide with a 1" throat. For such a light driver an equally light plastic or aluminium waveguide makes sense, for example the 18Sound XG10 Alu or Celestion H1-7050 ‘No Bell’; Beyma's own options are listed in the Horns & Waveguides category.

Beyma CD-101Nd/PK: manufacturer, spellings and classification

Beyma and Acustica Beyma refer to the same manufacturer: Acústica Beyma S.L. of Moncada near Valencia, Spain. The CD-101Nd/PK is a 1-inch compression driver with neodymium magnet from the CD series, available from 42.audio, Beyma dealer in Germany, with datasheet and full specifications in the driver database.

At 42.audio you get the BEYMA CD-101Nd/PK with all key data in the driver database. More drivers from this manufacturer: Atlas Beyma.

Thiele-Small parameters

Nominal impedance8 Ω
Resonance frequency fs2000 Hz
Force factor BL3 Tm

Specifications

Allgemein
Manufacturer BEYMA
Category Compression Driver
Series CD
Magnet Neodymium
Impedance (Ω) 8
Power handling (W) 40
Frequency from (Hz) 2000
Frequency to (Hz) 20000
Abmessungen & Korb
Diameter 1
Voice coil (inch) 1.1
Mounting depth (mm) 44
Weight (kg) 0.3
Thiele-Small-Parameter
Fs (Hz) 2000
BL (Tm) 3