BEYMA CD-171Fe/PK

https://42.audio/web/image/product.template/11636/image_1920?unique=24e070f

BEYMA CD-171Fe/PK — 1" / 1 inch · Compression Driver · Tweeter / HF Driver · Ferrite Magnet
80 W AES - 800 – 20000 Hz - 8 Ω
Part no.: 42A-CHS-KD-BEY-0029

113.00 € 113.0 EUR 113.00 €

Price on request

inkl. MwSt. · Versandkostenfrei innerhalb Deutschlands
  • Manufacturer
  • Category
  • Series
  • Magnet
  • Impedance (Ω)
  • Power handling (W)
  • Frequency from (Hz)
  • Frequency to (Hz)
  • Diameter
  • Voice coil (inch)
  • Mounting depth (mm)
  • Weight (kg)
  • Fs (Hz)
  • BL (Tm)

This combination does not exist.

Wir melden uns innerhalb von 24 h – Angebot 48 h gültig.
Danke! Wir prüfen deinen Zielpreis und melden uns schnellstens.
  1. Home
  2. Driver shop
  3. Compression Drivers
  4. BEYMA CD-171Fe/PK

BEYMA CD-171Fe/PK — 1" · Compression Driver · Ferrite-Magnet

80 W AES · Frequency range 800 Hz – 20000 Hz

Technical data

  • Diameter: 1 "
  • Voice coil: 1.75 "
  • Power handling: 80 W AES
  • Impedance: 8 Ω
  • Magnet: Ferrite
  • Weight: 2.3 kg
  • Mounting depth: 59 mm
  • Frequency range: 800 – 20000 Hz

Series: CD · Part no.: 42A-CHS-KD-BEY-0029

Beyma CD-171Fe/PK: 1" compression driver with a 1.75" voice coil and 80 W AES

There is no shortage of 1"-exit compression drivers; the Beyma CD-171Fe/PK belongs to the group that puts a 1.75" voice coil behind that exit. That is considerably more coil area than the smallest 1" drivers offer, and it is why Beyma rates the unit at 80 W AES and lets its working range start as low as 800 Hz. The motor is ferrite, and the 2.3 kg of mass leave no doubt: this is a classic iron motor, not a lightweight build.

The /PK suffix identifies the diaphragm variant. The same motor is also available as the CD-171Fe/PT, which carries identical electrical and mechanical figures: 8 Ω, 59 mm mounting depth, BL 5.4 Tm, the same frequency range. Choosing between the two is therefore a decision about the diaphragm and its tonal character, not about power handling or bandwidth. 42.audio carries the full Beyma range, and the comparison figures for the sibling models are in our driver database.

Use and enclosure

The natural home for this driver is a two-way PA cabinet or active monitor in which a 12" mid-woofer covers everything up to the lower midrange and the CD-171Fe/PK takes over on a horn above it. For the 1" throat, Beyma's own 1" horns and waveguides are the obvious match; across brands, the 18SOUND XT120, XT1086 Alu or Celestion H1-9040P are candidates. Check the flange bolt pattern before you order.

The 800 Hz lower limit describes where the driver operates at all, not where you should cross it over. For continuous duty at the full 80 W AES, cross at least an octave higher and with a steep slope: 12 dB/oct lets too much low-frequency energy through to a 1" driver, while 24 dB/oct from a DSP or a fourth-order passive network is the safe choice. The larger the horn, the lower you can push the crossover.

What to look out for

  • 8 Ω nominal impedance: runs on any PA amplifier channel, two units in parallel present 4 Ω.
  • Allow 59 mm of mounting depth behind the horn flange, plus room for the terminals.
  • 2.3 kg ferrite motor: bolt horn and baffle together properly rather than hanging the driver off the horn alone.
  • 1.75" voice coil and 80 W AES: the power rating only holds with a correctly set high-pass filter.
  • Working range 800 – 20,000 Hz: set the crossover well above the lower limit.

Frequently asked questions

How does the CD-171Fe/PK differ from the CD-171Fe/PT?

Both share the motor, the 1.75" voice coil, 80 W AES, 8 Ω and 59 mm mounting depth. The only difference is the diaphragm variant that Beyma marks with the PK or PT suffix. If your design already uses one of the two, stay with it; for a new design, both are equally usable.

Which amplifier suits the CD-171Fe/PK?

Any amplifier channel that drives 8 Ω cleanly is plenty; the 80 W AES figure is a continuous noise rating, and with music the HF branch draws far less. More important than headroom is a high-pass that protects the driver below its working range, most easily done in a DSP.

Which horn belongs on the CD-171Fe/PK?

Any horn with a 1" interface whose coverage pattern suits your project. Beyma offers matching horns and waveguides in its own category; across brands, the 18SOUND XT120, XT1086 Alu or Celestion H1-9040P are suitable 1" candidates. Confirm the bolt pattern on the flange before ordering.

Beyma CD-171Fe/PK: manufacturer, spellings and classification

Beyma and Acustica Beyma refer to the same manufacturer: Acústica Beyma S.L. of Moncada near Valencia, Spain. The CD-171Fe/PK is a 1-inch compression driver with ferrite magnet from the CD series, available from 42.audio, Beyma dealer in Germany, with datasheet and full specifications in the driver database.

At 42.audio you get the BEYMA CD-171Fe/PK with all key data in the driver database. More drivers from this manufacturer: Atlas Beyma.

Thiele-Small parameters

Nominal impedance8 Ω
Resonance frequency fs800 Hz
Force factor BL5.4 Tm

Specifications

Allgemein
Manufacturer BEYMA
Category Compression Driver
Series CD
Magnet Ferrite
Impedance (Ω) 8
Power handling (W) 80
Frequency from (Hz) 800
Frequency to (Hz) 20000
Abmessungen & Korb
Diameter 1
Voice coil (inch) 1.75
Mounting depth (mm) 59
Weight (kg) 2.3
Thiele-Small-Parameter
Fs (Hz) 800
BL (Tm) 5.4