BEYMA TD-8060

https://42.audio/web/image/product.template/11661/image_1920?unique=24e070f

BEYMA TD-8060 — Horn / Waveguide
80 W AES
Part no.: 42A-CHS-HW-BEY-0015

20.00 € 20.0 EUR 20.00 €

Price on request

inkl. MwSt. · Versandkostenfrei innerhalb Deutschlands
  • Manufacturer
  • Category
  • Series
  • Power handling (W)
  • Weight (kg)

This combination does not exist.

Wir melden uns innerhalb von 24 h – Angebot 48 h gültig.
Danke! Wir prüfen deinen Zielpreis und melden uns schnellstens.
  1. Home
  2. Driver shop
  3. Horns & Waveguides
  4. BEYMA TD-8060

BEYMA TD-8060 — Horn / Waveguide

80 W AES

Technical data

  • Power handling: 80 W AES
  • Weight: 0.13 kg

Series: TD · Part no.: 42A-CHS-HW-BEY-0015

Beyma TD-8060: 130 g horn rated 80 W AES for compact cabinets

130 grams. The Beyma TD-8060 weighs less than most of the compression drivers you would mount on it, and yet it is rated at 80 W AES. That makes it a horn for designers who allocate every centimetre and every gram in small enclosures: compact two-way tops, column speakers, ceiling installs, small monitors. At this weight the body is necessarily plastic.

Within Beyma's TD series the TD-8060 is the lightest model at 42.audio. The range covers horns and waveguides for compression drivers, and the TD-8060 fills the niche where a cast horn would simply be too big and too heavy. The power figure also shows that the horn is not meant as a toy – 80 W AES is a design rating for serious drivers.

Use and enclosure

A horn in this weight class depends on its mounting: place it flat on the baffle, bolt it at all provided points and avoid stressing the plastic. If the body becomes audible in operation, a thin layer of damping material on the back of the horn walls usually solves it. The compression driver comes from the Beyma range; throat diameter and bolt pattern are not stored as attributes and should be cross-checked in the 42.audio driver database before buying.

Compact horns only control the radiation from comparatively high frequencies upwards. So do not cross over too low: a high-pass with a steep slope and adequate margin above the driver's resonance matters more with a small horn than with a large one, because below that point the driver works without horn loading. The 80 W AES describe the horn's design rating; for the system's power handling the driver counts.

What to look out for

  • Weight 0.13 kg – hardly any effect on cabinet weight or ceiling suspension.
  • Rated 80 W AES; the system limit is the compression driver you mount.
  • Plastic body: bolt at all points, damp the rear if needed.
  • Small horn – cross over rather high, steep high-pass with margin above driver resonance.

Frequently asked questions

Which cabinets is such a light horn intended for?

Compact two-way tops, column and ceiling speakers and small monitors. At 130 g the TD-8060 is practically weight-neutral, so the driver defines the mass in the HF section.

Which driver fits the TD-8060?

A Beyma compression driver with matching exit diameter and mounting pattern. Neither value is stored as an attribute for the horn – check them in the 42.audio driver database.

How low may I cross over with the TD-8060?

Rather high than low. Small horns lose pattern control early towards the bottom, and the driver then runs without acoustic load. Keep the high-pass clearly above the driver's resonance and use a steep slope.

Beyma TD-8060: manufacturer, spellings and classification

Beyma and Acustica Beyma refer to the same manufacturer: Acústica Beyma S.L. of Moncada near Valencia, Spain. The TD-8060 is a horn / waveguide from the TD series, available from 42.audio, Beyma dealer in Germany, with datasheet and full specifications in the driver database.

At 42.audio you get the BEYMA TD-8060 with all key data in the driver database. More drivers from this manufacturer: Atlas Beyma.

Specifications

Allgemein
Manufacturer BEYMA
Category Horn / Waveguide
Series TD
Power handling (W) 80
Abmessungen & Korb
Weight (kg) 0.13