BEYMA 15P80Nd
BEYMA 15P80Nd — 15" / 15 inch · Woofer · Subwoofer / Bass · Neodymium Magnet
800 W AES - 101 dB - 40 – 4000 Hz - 8 Ω
Part no.: 42A-CHS-TT-BEY-0017
Documents
BEYMA 15P80Nd — 15" · Woofer · Neodymium-Magnet
800 W AES · 101 dB Sensitivity · Frequency range 40 Hz – 4000 Hz
Technical data
- Diameter: 15 "
- Voice coil: 4 "
- Power handling: 800 W AES
- Sensitivity: 101 dB
- Impedance: 8 Ω
- Magnet: Neodymium
- Weight: 6 kg
- Mounting depth: 209 mm
- Frequency range: 40 – 4000 Hz
Series: P · Part no.: 42A-CHS-TT-BEY-0017
Beyma 15P80Nd: 15" neodymium woofer with 101 dB and 6 kg for tops and mid-bass
Six kilograms for a 15" driver with a 4" voice coil and 800 W AES – the Beyma 15P80Nd from the P series shows what a large-format neodymium motor is good for. With 101 dB sensitivity, 8 Ω and a working range from 40 to 4,000 Hz it is a woofer for 2-way tops, mid-bass horns and flown systems in which efficiency and weight count equally.
The motor with BL 21 Tm moves a cone of 123 g, Fs sits at 39 Hz and Vas at 184 l – a generously soft-suspended driver designed for SPL and bandwidth. An Xmax of 8 mm and 704 cm³ of displacement allow strong kick and upper bass; it is not intended as the sole deep bass in small boxes. Le of 1.1 mH is low for a 4" coil and one reason the driver keeps up cleanly to 4,000 Hz. The mounting depth of 209 mm is unusually large for the format and has to be considered in the cabinet concept.
Use and enclosure
As a guide value from the classic approximation formulas, a vented box of 31 l tuned to 67 Hz with f3 at 90 Hz results – compact and aimed at mid-bass. That suits a 15" top above subwoofers, where the 15P80Nd with its 101 dB raises the headroom of the whole system. For lower reach, build larger and tune lower, or use it in a mid-bass horn, where the strong motor excels. Sealed at 18 l with fc 131 Hz only the role of a mid-bass chamber in a 3-way system remains. Work out the details with the enclosure calculator on 42.audio.
The upper limit of 4,000 Hz gives you freedom in choosing the crossover to the tweeter: well below that limit, where a 15" cone still radiates broadly enough to meet a horn. A 1.4" or 2" compression driver with a horn from the Beyma range completes the driver into a high-output 2-way top. A high-pass below the vent tuning is mandatory at 8 mm Xmax.
What to look out for
- 6 kg for a 15" with a 4" coil – made for flown tops and touring cabinets.
- Mounting depth 209 mm: deeper than usual, check cabinet depth and port routing.
- 101 dB sensitivity, 800 W AES – high SPL with moderate amplifier power.
- 8 Ω, Re 5.2 Ω: amplifier rated for 8 Ω, high-pass below fb in vented operation.
- Le 1.1 mH, upper limit 4,000 Hz: suits the woofer role in a 2-way top with horn.
Frequently asked questions
Is the 15P80Nd a subwoofer?
No. The vented guide value of 31 l with f3 around 90 Hz shows the focus on mid-bass and kick. With 8 mm Xmax and 101 dB sensitivity it is the woofer in a top above a subwoofer or the driver in a mid-bass horn, not the deep-bass supplier.
How does it differ from the 18 Sound 15ND930?
The 15ND930 has a similar profile with Fs 36 Hz and Vas 206 l, but is suspended slightly softer still than the Beyma with Fs 39 Hz and 184 l. Both are high-efficiency mid-bass drivers; in a box they behave similarly, the Beyma needs a little less volume.
What amplifier does the 15P80Nd need?
A channel with up to 800 W into 8 Ω exploits the AES rating; with 101 dB sensitivity, far less is enough in many tops. What matters is a high-pass below the tuning frequency so the 8 mm Xmax is not exceeded on low-frequency transients.
Beyma 15P80Nd: manufacturer, spellings and classification
Beyma and Acustica Beyma refer to the same manufacturer: Acústica Beyma S.L. of Moncada near Valencia, Spain. The 15P80Nd is a 15-inch woofer with neodymium magnet from the P series, available from 42.audio, Beyma dealer in Germany, with datasheet and full specifications in the driver database.
At 42.audio you get the BEYMA 15P80Nd with all key data in the driver database and the enclosure calculator. More drivers from this manufacturer: Atlas Beyma.
Thiele-Small parameters
| Nominal impedance | 8 Ω |
|---|---|
| Resonance frequency fs | 39 Hz |
| Total Q Qts | 0.21 |
| Electrical Q Qes | 0.36 |
| Mechanical Q Qms | 8.2 |
| Equivalent volume Vas | 184.0 l |
| Moving mass Mms | 123.0 g |
| Cone area Sd | 880 cm² |
| Linear excursion Xmax | 8 mm |
| Displaced volume Vd | 704 cm³ |
| Force factor BL | 21 Tm |
| DC resistance Re | 5.2 Ω |
| Voice coil inductance Le | 1.1 mH |
Enclosure suggestion
The EBP of 108 suggests a bass-reflex enclosure. EBP = fs / Qes = 39 / 0.36
Sealed (Qtc 0.707)
- Enclosure volume Vb
- 17.8 l
- System resonance Fc
- 131 Hz
- Cut-off frequency F3
- 131 Hz
Bass reflex (QB3 after Small)recommended
- Enclosure volume Vb
- 21.3 l
- Tuning frequency Fb
- 76 Hz
- Cut-off frequency F3
- 101 Hz
Vb is the required net internal volume, Fb the tuning frequency of the reflex port and F3 the frequency at which the level has dropped by 3 dB. Calculated approximation after Small. A starting point for simulation, not a finished build plan.
Comparable drivers
Same size, same type, Qts within ±30 %.
- B&C Speakers 15NW76fs 39 Hz · Qts 0.21 · Vas 143 l · in the database
- B&C Speakers 15FW76fs 40 Hz · Qts 0.21 · Vas 138 l · in the database
- Beyma 15QLEX1600Fefs 33 Hz · Qts 0.21 · Vas 102 l · in the shop
- FaitalPRO 15XL2400fs 32 Hz · Qts 0.21 · Vas 113.9 l · in the database
- B&C Speakers 15NDL76fs 37 Hz · Qts 0.22 · Vas 195 l · in the database
- 18 Sound 15ND930fs 36 Hz · Qts 0.22 · Vas 206 l · in the shop
Specifications
| Allgemein | |
|---|---|
| Manufacturer | BEYMA |
| Category | Low Frequency |
| Series | P |
| Magnet | Neodymium |
| Impedance (Ω) | 8 |
| Power handling (W) | 800 |
| Sensitivity (dB) | 101 |
| Frequency from (Hz) | 40 |
| Frequency to (Hz) | 4000 |
| Abmessungen & Korb | |
|---|---|
| Diameter | 15 |
| Voice coil (inch) | 4 |
| Mounting depth (mm) | 209 |
| Weight (kg) | 6 |
| Thiele-Small-Parameter | |
|---|---|
| Re (Ω) | 5.2 |
| Le (mH) | 1.1 |
| Fs (Hz) | 39 |
| Qms | 8.2 |
| Qes | 0.36 |
| Qts | 0.21 |
| Vas (l) | 184 |
| Xmax (mm) | 8 |
| Vd (cm³) | 704 |
| BL (Tm) | 21 |
| Mms (kg) | 0.123 |
| Sd (m²) | 0.088 |