BEYMA CD-1114Fe

https://42.audio/web/image/product.template/11629/image_1920?unique=24e070f

BEYMA CD-1114Fe — 1.4" / 1.4 inch · Compression Driver · Tweeter / HF Driver · Ferrite Magnet
70 W AES - 700 – 19000 Hz - 8 Ω
Part no.: 42A-CHS-KD-BEY-0022

107.00 € 107.0 EUR 107.00 €

Price on request

inkl. MwSt. · Versandkostenfrei innerhalb Deutschlands
  • Manufacturer
  • Category
  • Series
  • Magnet
  • Impedance (Ω)
  • Power handling (W)
  • Frequency from (Hz)
  • Frequency to (Hz)
  • Diameter
  • Voice coil (inch)
  • Mounting depth (mm)
  • Weight (kg)
  • Fs (Hz)
  • BL (Tm)

This combination does not exist.

Wir melden uns innerhalb von 24 h – Angebot 48 h gültig.
Danke! Wir prüfen deinen Zielpreis und melden uns schnellstens.
  1. Home
  2. Driver shop
  3. Compression Drivers
  4. BEYMA CD-1114Fe

BEYMA CD-1114Fe — 1.4" · Compression Driver · Ferrite-Magnet

70 W AES · Frequency range 700 Hz – 19000 Hz

Technical data

  • Diameter: 1.4 "
  • Voice coil: 1.75 "
  • Power handling: 70 W AES
  • Impedance: 8 Ω
  • Magnet: Ferrite
  • Weight: 1.9 kg
  • Mounting depth: 58 mm
  • Frequency range: 700 – 19000 Hz

Series: CD · Part no.: 42A-CHS-KD-BEY-0022

Beyma CD-1114Fe: 1.4" compression driver with 1.75" coil for large horns

The Beyma CD-1114Fe is a special case within the CD series: it carries the motor of the 1" models with a 1.75" voice coil, 70 W AES and 6.6 Tm, but ends in a 1.4" horn throat. The frequency range is 700 to 19,000 Hz and nominal impedance 8 Ω. The ferrite motor brings the driver to 1.9 kg at 58 mm mounting depth.

Why a 1.4" throat on a driver of this size? The larger connection allows horns with a bigger throat cross-section, designed for 1.4" drivers, to be used without an adapter. That is practical when an existing 1.4" horn is to be reused, or when a product series with different driver sizes shares the same horns. Electrically the CD-1114Fe matches the 1" model CD-11Fe, so the choice between the two is made by the horn, not by the driver.

Use and enclosure

The CD-1114Fe fits 1.4" horns such as the Beyma models from the Horns & Waveguides category or, with a documented 1.4" throat, the 18Sound XT1464, XR1464C, XR1496C, PR614, H860 3D Print and XG14 Alu. A 1.4" horn is usually larger than a 1" horn and loads the driver better near the lower limit; that benefits the crossover, which with a 700 Hz resonance you set at least an octave above.

At 70 W AES the CD-1114Fe is designed for two-way cabinets with 12" woofers, and equally as the HF unit in three-way systems above a midrange horn. Filter at a minimum of 12 dB/octave, in active systems at 24 dB/octave. The efficiency of a driver on a large horn is well above that of a cone driver, so in a passive design an L-pad belongs in the HF branch. The 1.9 kg weight calls for solid bolting to plastic horns; the 58 mm mounting depth is compact for a 1.4" model.

What to look out for

  • 1.4" throat with 1.75" coil: fits 1.4" horns without an adapter, electrically like the CD-11Fe.
  • 70 W AES, 700–19,000 Hz: for 2-way tops with 12" woofers or as HF in 3-way systems.
  • Ferrite, 1.9 kg: bolt horn and driver securely, include the weight in rigging calculations.
  • Mounting depth 58 mm: compact for a 1.4" driver.
  • 8 Ω, 6.6 Tm: uncritical amplifier load, level matching via L-pad or DSP.

Frequently asked questions

Why choose the CD-1114Fe instead of the CD-11Fe?

Only because of the horn. Both have a 1.75" coil, 70 W AES, 8 Ω, 6.6 Tm and 700 to 19,000 Hz; the CD-1114Fe has a 1.4" throat, the CD-11Fe a 1" throat. If your horn has a 1.4" throat, the CD-1114Fe is the right choice.

Which 1.4" horns fit?

At Beyma the models from the Horns & Waveguides category with a 1.4" throat; documented alternatives are the 18Sound XT1464, XR1464C, XR1496C and XG14 Alu. Make sure the bolt pattern and mounting type of horn and driver match.

Where do I cross over the CD-1114Fe?

Resonance is at 700 Hz, so the crossover belongs at least an octave above. A large 1.4" horn helps because it loads the driver better in the crossover region; steep filters of 12 to 24 dB/octave are mandatory.

Beyma CD-1114Fe: manufacturer, spellings and classification

Beyma and Acustica Beyma refer to the same manufacturer: Acústica Beyma S.L. of Moncada near Valencia, Spain. The CD-1114Fe is a 1.4-inch compression driver with ferrite magnet from the CD series, available from 42.audio, Beyma dealer in Germany, with datasheet and full specifications in the driver database.

At 42.audio you get the BEYMA CD-1114Fe with all key data in the driver database. More drivers from this manufacturer: Atlas Beyma.

Thiele-Small parameters

Nominal impedance8 Ω
Resonance frequency fs700 Hz
Force factor BL6.6 Tm

Specifications

Allgemein
Manufacturer BEYMA
Category Compression Driver
Series CD
Magnet Ferrite
Impedance (Ω) 8
Power handling (W) 70
Frequency from (Hz) 700
Frequency to (Hz) 19000
Abmessungen & Korb
Diameter 1.4
Voice coil (inch) 1.75
Mounting depth (mm) 58
Weight (kg) 1.9
Thiele-Small-Parameter
Fs (Hz) 700
BL (Tm) 6.6