BEYMA CP-755Nd

https://42.audio/web/image/product.template/11615/image_1920?unique=24e070f

BEYMA CP-755Nd — 1.4" / 1.4 inch · Compression Driver · Tweeter / HF Driver · Neodymium Magnet
60 W AES - 600 – 20000 Hz - 8 Ω
Part no.: 42A-CHS-KD-BEY-0008

405.00 € 405.0 EUR 405.00 €

Price on request

inkl. MwSt. · Versandkostenfrei innerhalb Deutschlands
  • Manufacturer
  • Category
  • Series
  • Magnet
  • Impedance (Ω)
  • Power handling (W)
  • Frequency from (Hz)
  • Frequency to (Hz)
  • Diameter
  • Voice coil (inch)
  • Mounting depth (mm)
  • Weight (kg)
  • Fs (Hz)
  • BL (Tm)

This combination does not exist.

Wir melden uns innerhalb von 24 h – Angebot 48 h gültig.
Danke! Wir prüfen deinen Zielpreis und melden uns schnellstens.
  1. Home
  2. Driver shop
  3. Compression Drivers
  4. BEYMA CP-755Nd

BEYMA CP-755Nd — 1.4" · Compression Driver · Neodymium-Magnet

60 W AES · Frequency range 600 Hz – 20000 Hz

Technical data

  • Diameter: 1.4 "
  • Voice coil: 2.85 "
  • Power handling: 60 W AES
  • Impedance: 8 Ω
  • Magnet: Neodymium
  • Weight: 2.9 kg
  • Mounting depth: 66 mm
  • Frequency range: 600 – 20000 Hz

Series: CP · Part no.: 42A-CHS-KD-BEY-0008

Beyma CP-755Nd: 1.4" neodymium compression driver, 2.85" coil, 60 W AES from 600 Hz

2.9 kg for a compression driver with a 2.85" voice coil and a 1.4" horn exit: that is the headline of the Beyma CP-755Nd. The neodymium magnet makes possible what would weigh more than twice as much with ferrite, and the motor still produces a BL of 11.5 Tm. The driver runs at 8 Ω, handles 60 W AES and covers 600 Hz to 20,000 Hz.

The 1.4" format sits between the small 1" drivers and the big 2" models, and for many designers it is the most sensible compromise: it can be crossed low enough for a two-way top with a large cone, yet has a clearly smaller throat than a 2" driver, which benefits reproduction in the top octaves. Within the CP series the CP-755Nd is the neodymium counterpart to the CP-755Ti with the same coil diameter.

Use and enclosure

The CP-755Nd is a candidate for tops with a 12" woofer or a larger cone, for flown two-way systems and for portable cabinets where every kilo on stage counts. With a mounting depth of only 66 mm it also fits into shallow enclosures.

All 1.4" horns are suitable: at 42.audio that means, for instance, the 18Sound XR1464C for controlled directivity, the 18Sound XR1496C for wider coverage, the 18Sound XT1464 or the compact 18Sound XG14 Alu; Beyma horns are found in the Horns & Waveguides category. Keep your distance from the 600 Hz lower limit when setting the crossover: at 24 dB/octave the high-pass should sit an octave above it, and with a large horn and moderate levels you can go somewhat lower. The 60 W AES rating calls for a limiter in active systems and a properly calculated high-pass with protection capacitor in passive ones.

What to look out for

  • Neodymium magnet: 2.9 kg instead of ferrite weight, yet a strong motor with BL 11.5 Tm.
  • 1.4" horn exit: low crossover possible, clean highs up to 20,000 Hz.
  • 2.85" voice coil: thermal reserve for continuous operation.
  • Mounting depth 66 mm: very shallow, fits into slim top cabinets.
  • 60 W AES at 8 Ω: plan for a limiter or protection capacitor.

Frequently asked questions

CP-755Nd or CP-755Ti, which one is better?

Both share the throat size and the 2.85" voice coil. The CP-755Nd is the much lighter neodymium version at 2.9 kg with a stronger motor, the CP-755Ti the heavier ferrite version. For portable and flown systems the weight clearly favours the Nd.

Which amplifier is appropriate?

An 8 Ω channel in the power class of the 60 W AES rating, with a limiter in active use. Compression drivers need little power because of their high efficiency; excess only endangers the coil.

How low may the crossover be?

600 Hz is the lower limit of the frequency range. With a steep high-pass the crossover frequency should be at least an octave above it; only with a very large horn and low levels can you move closer.

Beyma CP-755Nd: manufacturer, spellings and classification

Beyma and Acustica Beyma refer to the same manufacturer: Acústica Beyma S.L. of Moncada near Valencia, Spain. The CP-755Nd is a 1.4-inch compression driver with neodymium magnet from the CP series, available from 42.audio, Beyma dealer in Germany, with datasheet and full specifications in the driver database.

At 42.audio you get the BEYMA CP-755Nd with all key data in the driver database. More drivers from this manufacturer: Atlas Beyma.

Thiele-Small parameters

Nominal impedance8 Ω
Resonance frequency fs600 Hz
Force factor BL11.5 Tm

Specifications

Allgemein
Manufacturer BEYMA
Category Compression Driver
Series CP
Magnet Neodymium
Impedance (Ω) 8
Power handling (W) 60
Frequency from (Hz) 600
Frequency to (Hz) 20000
Abmessungen & Korb
Diameter 1.4
Voice coil (inch) 2.85
Mounting depth (mm) 66
Weight (kg) 2.9
Thiele-Small-Parameter
Fs (Hz) 600
BL (Tm) 11.5