BEYMA TD-365
BEYMA TD-365 — Horn / Waveguide
60 W AES
Part no.: 42A-CHS-HW-BEY-0005
Documents
BEYMA TD-365 — Horn / Waveguide
60 W AES
Technical data
- Power handling: 60 W AES
- Weight: 1.2 kg
Series: TD · Part no.: 42A-CHS-HW-BEY-0005
Beyma TD-365: TD-series HF horn rated 60 W AES with a 1.2 kg body
Judge a horn by its weight and the Beyma TD-365 quickly shows its direction: 1.2 kg means a substantial body carrying more material than the smaller metal horns in the series. The TD-365 is rated at 60 W AES and intended for use with a compression driver – an HF horn for cabinets where minimum weight matters less than a quiet body and controlled coverage.
Beyma's TD series covers horns and waveguides for various throat sizes and coverage angles. For the TD-365, throat and angles are not stored as attributes in the shop; what is certain are power rating and weight. For your selection that means: the horn fits if the Beyma driver of your choice matches the horn's throat size and power design – and that is best verified before purchase.
Use and enclosure
A horn with more mass suits fixed installations and cabinets that run at high level for long periods: the body stays acoustically inconspicuous, and mounting on a solid baffle is uncritical. The TD-365 pairs with a compression driver from the Beyma range whose exit corresponds to the horn throat. As no datasheet PDF is on file, the 42.audio driver database helps when matching the throat size.
Set the crossover according to driver and horn mouth: above the frequency at which the mouth controls the radiation, and with a margin above the driver's resonance. A larger body generally allows a somewhat lower crossover than a small horn – how low exactly is settled by measuring in the finished cabinet. The 60 W AES describe the design rating; the system limit remains the driver.
What to look out for
- Weight 1.2 kg – solid body, suitable for fixed installation and continuous duty.
- Rated 60 W AES; the compression driver defines the actual limit.
- Match the driver's throat size and mounting pattern before ordering.
- Place the crossover above the horn's pattern control and with margin above driver resonance.
Frequently asked questions
Does the TD-365 make sense in portable boxes too?
Yes, if an extra 1.2 kg does not bother you. For touring boxes with a strict weight budget, Beyma offers lighter plastic horns in the same series; for installations, the mass of the TD-365 is more of an advantage.
Which driver fits this horn?
A Beyma compression driver with the exit diameter of the horn throat. Check the value in the 42.audio driver database, since the throat is not stored as an attribute for the horn.
How low can I cross over with the TD-365?
That depends on mouth and driver. Measure the response in the cabinet and place the crossover where horn and driver still load evenly together – with a horn of this size usually somewhat lower than with compact models.
Beyma TD-365: manufacturer, spellings and classification
Beyma and Acustica Beyma refer to the same manufacturer: Acústica Beyma S.L. of Moncada near Valencia, Spain. The TD-365 is a horn / waveguide from the TD series, available from 42.audio, Beyma dealer in Germany, with datasheet and full specifications in the driver database.
At 42.audio you get the BEYMA TD-365 with all key data in the driver database. More drivers from this manufacturer: Atlas Beyma.
Specifications
| Allgemein | |
|---|---|
| Manufacturer | BEYMA |
| Category | Horn / Waveguide |
| Series | TD |
| Power handling (W) | 60 |
| Abmessungen & Korb | |
|---|---|
| Weight (kg) | 1.2 |