18SOUND 18iD/iD200

https://42.audio/web/image/product.template/11828/image_1920?unique=24e070f

18SOUND (Eighteen Sound) 18iD/iD200 — 18" / 18 inch · Super-Performance Woofer · Subwoofer / Bass · Neodymium
5.35" voice coil · 2 Ω
Part no.: 42A-CHS-TT-18S-0042

865.00 € 865.0 EUR 865.00 €

Price on request

inkl. MwSt. · Versandkostenfrei innerhalb Deutschlands
  • Manufacturer
  • Category
  • Series
  • Magnet
  • Impedance (Ω)
  • Power handling (W)
  • Sensitivity (dB)
  • Frequency from (Hz)
  • Frequency to (Hz)
  • Diameter
  • Voice coil (inch)
  • Mounting depth (mm)
  • Weight (kg)
  • Re (Ω)
  • Le (mH)
  • Fs (Hz)
  • Qms
  • Qes
  • Qts
  • Vas (l)
  • Xmax (mm)
  • BL (Tm)
  • Mms (kg)
  • Sd (m²)

This combination does not exist.

Wir melden uns innerhalb von 24 h – Angebot 48 h gültig.
Danke! Wir prüfen deinen Zielpreis und melden uns schnellstens.
  1. Home
  2. Driver shop
  3. Woofers
  4. 18SOUND 18iD/iD200

18SOUND 18iD/iD200 — 18" · Woofer

1800 W AES · 95 dB Sensitivity · Frequency range 30 Hz – 2500 Hz

Technical data

  • Diameter: 18 "
  • Voice coil: 5.3 "
  • Power handling: 1800 W AES
  • Sensitivity: 95 dB
  • Impedance: 2 Ω
  • Magnet: Neo
  • Weight: 12.5 kg
  • Mounting depth: 236 mm
  • Frequency range: 30 – 2500 Hz

Thiele-Small parameters

  • Fs: 40 Hz
  • Qts: 0.26
  • Qms: 5.5
  • Qes: 0.27
  • Vas: 67 l
  • Xmax: 15.5 mm
  • BL: 24 Tm
  • Re: 1.5 Ω
  • Le: 1.22 mH
  • Mms: 0.42 kg
  • Sd: 0.1225 m²

Datasheet (PDF) · Manufacturer page

Series: iD · Part no.: 42A-CHS-TT-18S-0042

18Sound 18iD/iD200: 18" neodymium subwoofer with 2 Ω and 5.3" voice coil

The 18iD/iD200 is an 18" subwoofer from 18Sound's iD series, positioned as a super-performance woofer for active systems with matching amplifier modules. Its most striking feature is the 2 Ω nominal impedance with Re of 1.5 Ω. This is not a driver for any random PA amplifier, but for amplifiers designed for 2 Ω loads that deliver high current into low impedance. The large 5.3" voice coil (18Sound quotes 5.35") handles 1800 W and sits in a neodymium motor.

The parameters: fs 40 Hz, Qts 0.26, Vas 67 l, Xmax 15.5 mm, BL 24 Tm, Mms 0.42 kg. The small Vas with high moving mass indicates a stiff suspension designed for compact enclosures and electronic equalisation. 95 dB sensitivity at 2 Ω also means the amplifier pushes far more power into the driver at a given voltage than it would at 8 Ω. At 12.5 kg and 236 mm mounting depth the 18iD is relatively compact.

Use and enclosure

An EBP of 148 points to bass reflex or horn loading. The classic approximation formulas give a guideline vented volume of only about 21 l tuned to 56 Hz with f3 around 69 Hz, or sealed about 10 l with fc at 109 Hz. These figures mainly show that, by the textbook, the driver is not optimised for passive deep bass: in practice the 18iD works in larger boxes with lower tuning and DSP equalisation, where 15.5 mm Xmax and 1800 W handling make up for the missing textbook extension. The response starts at 30 Hz. The enclosure calculator at 42.audio helps balance volume, tuning and excursion demand.

As a subwoofer it is crossed over low; although the operating range extends to 2500 Hz, the 2 Ω design is clearly tailored to active subwoofer amplifiers with limiter and high-pass.

What to look out for

  • 2 Ω nominal, Re 1.5 Ω: only run on amplifiers rated for continuous 2 Ω loads
  • 5.3" voice coil and 1800 W – cooling and power handling designed for active systems
  • Vas 67 l, fs 40 Hz, Qts 0.26: compact boxes with DSP equalisation
  • Xmax 15.5 mm at Mms 0.42 kg
  • Neodymium, 12.5 kg, mounting depth 236 mm

Frequently asked questions

Can I run the 18iD/iD200 on a normal 4 Ω PA amplifier?

Only if the amplifier is explicitly rated for 2 Ω. On an amplifier that tolerates a minimum of 4 Ω you risk overheating or protection shutdown. Two drivers in series give 4 Ω and are an option for dual-18 cabinets.

Why is the Vas so small?

Vas 67 l results from a stiff suspension on an 18" cone area (Sd 0.1225 m²). This allows small boxes but requires electronic boost in the deep bass – exactly what the iD series with matching amplifiers is designed for.

How deep does the 18iD go?

The operating range starts at 30 Hz. How deep the cabinet actually reaches depends on volume, tuning and DSP; the classic guidelines with fb at 56 Hz sit far higher, but they are not the practical limit.

18Sound 18iD/iD200: manufacturer, spellings and classification

18Sound, 18 Sound and Eighteensound all refer to the same manufacturer: Eighteen Sound S.r.l. of Reggio Emilia, Italy. The 18iD/iD200 is a 18-inch woofer with neodymium magnet from the iD series, available from 42.audio, 18Sound dealer in Germany, with datasheet and full specifications in the driver database.

At 42.audio you get the 18SOUND 18iD/iD200 with datasheet PDF, all key data in the driver database and the enclosure calculator. More drivers from this manufacturer: Atlas 18Sound.

Specifications

Allgemein
Manufacturer 18SOUND
Category Low Frequency
Series iD
Magnet Neo
Impedance (Ω) 2
Power handling (W) 1800
Sensitivity (dB) 95
Frequency from (Hz) 30
Frequency to (Hz) 2500
Abmessungen & Korb
Diameter 18
Voice coil (inch) 5.3
Mounting depth (mm) 236
Weight (kg) 12.5
Thiele-Small-Parameter
Re (Ω) 1.5
Le (mH) 1.22
Fs (Hz) 40
Qms 5.5
Qes 0.27
Qts 0.26
Vas (l) 67
Xmax (mm) 15.5
BL (Tm) 24
Mms (kg) 0.42
Sd (m²) 0.1225