18SOUND 18W1300

https://42.audio/web/image/product.template/11744/image_1920?unique=24e070f

18SOUND (Eighteen Sound) 18W1300 — 18" / 18 inch · Woofer · Subwoofer / Bass · Ferrite Magnet
4" voice coil · 8 Ω
Part no.: 42A-CHS-TT-18S-0011

384.00 € 384.0 EUR 384.00 €

Price on request

inkl. MwSt. · Versandkostenfrei innerhalb Deutschlands
  • Manufacturer
  • Category
  • Series
  • Magnet
  • Impedance (Ω)
  • Power handling (W)
  • Sensitivity (dB)
  • Frequency from (Hz)
  • Frequency to (Hz)
  • Diameter
  • Voice coil (inch)
  • Mounting depth (mm)
  • Weight (kg)
  • Re (Ω)
  • Le (mH)
  • Fs (Hz)
  • Qms
  • Qes
  • Qts
  • Vas (l)
  • Xmax (mm)
  • BL (Tm)
  • Mms (kg)
  • Sd (m²)

This combination does not exist.

Wir melden uns innerhalb von 24 h – Angebot 48 h gültig.
Danke! Wir prüfen deinen Zielpreis und melden uns schnellstens.
  1. Home
  2. Driver shop
  3. Woofers
  4. 18SOUND 18W1300

18SOUND 18W1300 — 18" · Woofer

850 W AES · 99.5 dB Sensitivity · Frequency range 38 Hz – 3300 Hz

Technical data

  • Diameter: 18 "
  • Voice coil: 4 "
  • Power handling: 850 W AES
  • Sensitivity: 99.5 dB
  • Impedance: 8 Ω
  • Magnet: Ferrite
  • Weight: 13 kg
  • Mounting depth: 211 mm
  • Frequency range: 38 – 3300 Hz

Datasheet (PDF) · Manufacturer page

Series: W · Part no.: 42A-CHS-TT-18S-0011

18Sound 18W1300: 18" ferrite woofer with 99.5 dB efficiency and 336 l Vas

The 18W1300 belongs to 18Sound's W series and is a woofer built around a light cone and high efficiency: 99.5 dB sensitivity with only 0.129 kg of moving mass. The ferrite magnet drives a 4" voice coil, power handling is 850 W and nominal impedance 8 Ω with Re of 5 Ω.

The Vas of 336 l is large, which reveals a soft suspension and a light cone. Together with fs 35 Hz and Qts 0.33 this gives a driver that plays deep in large vented boxes without needing much power. Xmax of 8.5 mm sets the limit, though: the 18W1300 is a high-output bass for reflex and horn systems, not a long-throw subwoofer for small boxes. The low Le of 1.48 mH benefits transient behaviour in the upper bass.

Use and enclosure

The EBP of 100 sits right on the boundary, but bass reflex is still the obvious choice. The guideline from the TSP: around 209 l tuned to 40 Hz with a lower cut-off near 43 Hz. Sealed would be about 94 l with fc at 75 Hz, at the cost of noticeably less depth. With the enclosure calculator at 42.audio you can try smaller volumes with higher tuning if space is tight.

The 38 to 3300 Hz response allows use as the bass in a 2-way PA cabinet with a horn tweeter, provided the crossover sits well above the lower limit. At 211 mm mounting depth it fits shallow cabinets; the 13 kg weight is typical ferrite.

What to look out for

  • 99.5 dB sensitivity – 850 W already gives high levels, more power gains little
  • Xmax 8.5 mm: a high-pass below the tuning frequency prevents bottoming
  • Vas 336 l demands a large cabinet, guideline 209 l vented
  • 8 Ω, Re 5 Ω, Le 1.48 mH – easy to drive, fast transients
  • Mounting depth 211 mm, weight 13 kg

Frequently asked questions

18W1300 or 18NLW4500 – what is the difference?

Both share fs 35 Hz and Qts 0.33, but the 18NLW4500 has a much smaller Vas of 151 l and a neodymium motor. The 18W1300 needs more volume but brings 99.5 dB efficiency.

Is the 18W1300 enough for a rental bass reflex sub?

For reflex subs tuned around 40 Hz, yes, provided the amplifier has a limiter. For deep bass below the tuning frequency, long-throw drivers with more Xmax are the better choice.

Which amplifier is recommended?

An amplifier around 850 W at 8 Ω. Because of the 99.5 dB sensitivity, headroom matters less than a good high-pass and a limiter that respects the 8.5 mm Xmax.

18Sound 18W1300: manufacturer, spellings and classification

18Sound, 18 Sound and Eighteensound all refer to the same manufacturer: Eighteen Sound S.r.l. of Reggio Emilia, Italy. The 18W1300 is a 18-inch woofer with ferrite magnet from the W series, available from 42.audio, 18Sound dealer in Germany, with datasheet and full specifications in the driver database.

At 42.audio you get the 18SOUND 18W1300 with datasheet PDF, all key data in the driver database and the enclosure calculator. More drivers from this manufacturer: Atlas 18Sound.

Thiele-Small parameters

Nominal impedance8 Ω
Resonance frequency fs35 Hz
Total Q Qts0.33
Electrical Q Qes0.35
Mechanical Q Qms5
Equivalent volume Vas336.0 l
Moving mass Mms129.0 g
Cone area Sd1,225 cm²
Linear excursion Xmax8.5 mm
Force factor BL20.4 Tm
DC resistance Re5 Ω
Voice coil inductance Le1.48 mH

Enclosure suggestion

The EBP of 100 is in the intermediate range — either works; sealed plays tighter, bass reflex deeper and louder. EBP = fs / Qes = 35 / 0.35

Sealed (Qtc 0.707)

Enclosure volume Vb
93.6 l
System resonance Fc
75 Hz
Cut-off frequency F3
75 Hz

Bass reflex (QB3 after Small)

Enclosure volume Vb
173.2 l
Tuning frequency Fb
43 Hz
Cut-off frequency F3
47 Hz

Vb is the required net internal volume, Fb the tuning frequency of the reflex port and F3 the frequency at which the level has dropped by 3 dB. Calculated approximation after Small. A starting point for simulation, not a finished build plan.

Comparable drivers

Same size, same type, Qts within ±30 %.

Specifications

Allgemein
Manufacturer 18SOUND
Category Low Frequency
Series W
Magnet Ferrite
Impedance (Ω) 8
Power handling (W) 850
Sensitivity (dB) 99.5
Frequency from (Hz) 38
Frequency to (Hz) 3300
Abmessungen & Korb
Diameter 18
Voice coil (inch) 4
Mounting depth (mm) 211
Weight (kg) 13
Thiele-Small-Parameter
Re (Ω) 5
Le (mH) 1.48
Fs (Hz) 35
Qms 5
Qes 0.35
Qts 0.33
Vas (l) 336
Xmax (mm) 8.5
BL (Tm) 20.4
Mms (kg) 0.129
Sd (m²) 0.1225