42.audio Web (EUR)
  1. All Products
  2. BEYMA 10CX300/Fe

BEYMA 10CX300/Fe

https://42.audio/web/image/product.template/11601/image_1920?unique=24e070f

BEYMA 10CX300/Fe — 10" / 10 inch · Coaxial Speaker · Coax / Coaxial Driver · Ferrite Magnet
300 W AES - 96.5 dB - 50 – 20000 Hz - 8 Ω
Part no.: 42A-CHS-KO-BEY-0007

325.00 € 325.0 EUR 325.00 €

Price on request

inkl. MwSt. · Versandkostenfrei innerhalb Deutschlands
  • Manufacturer
  • Category
  • Series
  • Magnet
  • Impedance (Ω)
  • Power handling (W)
  • Sensitivity (dB)
  • Frequency from (Hz)
  • Frequency to (Hz)
  • Diameter
  • Voice coil (inch)
  • Weight (kg)
  • Re (Ω)
  • Le (mH)
  • Fs (Hz)
  • Qms
  • Qes
  • Qts
  • Vas (l)
  • Xmax (mm)
  • Vd (cm³)
  • BL (Tm)
  • Mms (kg)
  • Sd (m²)

This combination does not exist.

Contact Us
Wir melden uns innerhalb von 24 h – Angebot 48 h gültig.
Danke! Wir prüfen deinen Zielpreis und melden uns schnellstens.
  1. Home
  2. Driver shop
  3. Coaxial Drivers
  4. BEYMA 10CX300/Fe

BEYMA 10CX300/Fe — 10" · Coaxial Speaker · Ferrite-Magnet

300 W AES · 96.5 dB Sensitivity · Frequency range 50 Hz – 20000 Hz

Technical data

  • Diameter: 10 "
  • Voice coil: 1.75 "
  • Power handling: 300 W AES
  • Sensitivity: 96.5 dB
  • Impedance: 8 Ω
  • Magnet: Ferrite
  • Weight: 5.1 kg
  • Frequency range: 50 – 20000 Hz

Series: CX · Part no.: 42A-CHS-KO-BEY-0007

Beyma 10CX300/Fe: 10" ferrite coax with 300 W, 96.5 dB and 50–20,000 Hz for monitors

Beyma lays out the 10CX300/Fe as a complete full-range coaxial driver: a 10" cone with ferrite magnet, a 1.75" voice coil, 300 W AES power handling and 96.5 dB sensitivity, with a stated frequency range of 50 Hz to 20,000 Hz for the whole system. Nominal impedance is 8 Ω with Re 5.2 Ω. That makes it the smallest Beyma coax in the CX series at 42.audio and the one with the widest range of uses, from near-field monitor to small installation.

The Thiele-Small parameters match that task: Fs 48 Hz, Qts 0.38, Vas 63 l, BL 11.65 Tm and a moving mass of 35 g. The Xmax of 6.7 mm is generous for a 10" and, together with the 380 cm² cone area, gives a displacement volume of 256 cm³. That is enough for real low end from a 10" driver as long as the cabinet cooperates. The inductance of 0.4 mH is low, which lets the cone rise cleanly up to the transition into the tweeter.

Use and enclosure

With an EBP of 117 the 10CX300/Fe sits in the range where bass reflex is clearly the better choice. Guideline: about 59 l net, tuned to 48 Hz, with f3 also at 48 Hz. That is a large cabinet for a 10", but it rewards you with low end that handles speech, jazz and acoustic material without a sub. Smaller boxes are possible but push f3 upward; the enclosure calculator at 42.audio shows the effect directly. Sealed you get about 26 l with fc at 89 Hz, which works well as a monitor with subwoofer or as a surround speaker.

Take the crossover frequency to the HF unit from Beyma's specifications for the driver; it depends on the HF voice coil and the horn profile formed by the cone. A high-pass below the tuning frequency is part of the package with 6.7 mm Xmax, so the cone does not bottom out on deep-bass transients. The ferrite magnet makes the driver heavier at 5.1 kg than a neodymium coax of the same size, which is irrelevant for fixed installations and studio monitors.

What to look out for

  • Ferrite magnet, 5.1 kg: uncritical for installation and studio, worth noting for touring
  • 1.75" voice coil, 300 W AES at 8 Ω: small amplifiers and plate amps are enough
  • Xmax 6.7 mm, Vd 256 cm³: real low end from a 10" in about 59 l bass reflex
  • Qts 0.38 and Vas 63 l: needs volume, rewards with f3 around 48 Hz
  • Le 0.4 mH: low inductance, straightforward crossover design in the transition

Frequently asked questions

Is the 10CX300/Fe suitable for a studio monitor?

Yes, that is an obvious use. In about 59 l bass reflex tuned to 48 Hz it reaches an f3 around 48 Hz as a guideline, radiated coaxially from one axis with 96.5 dB sensitivity.

What is the difference from the 18Sound 10CX650?

The 18Sound 10CX650 has Fs 54 Hz, Qts 0.35 and Vas 36.4 l and therefore gets by with a smaller cabinet. The Beyma 10CX300/Fe with Vas 63 l and Fs 48 Hz goes deeper in larger boxes. Both are in the driver database at 42.audio.

Which amplifier fits?

A channel around 300 W AES into 8 Ω uses the full rating. With 96.5 dB sensitivity the driver also works on smaller plate amps; a high-pass below the tuning matters more than high power.

Beyma 10CX300/Fe: manufacturer, spellings and classification

Beyma and Acustica Beyma refer to the same manufacturer: Acústica Beyma S.L. of Moncada near Valencia, Spain. The 10CX300/Fe is a 10-inch coaxial driver with ferrite magnet from the CX series, available from 42.audio, Beyma dealer in Germany, with datasheet and full specifications in the driver database.

At 42.audio you get the BEYMA 10CX300/Fe with all key data in the driver database and the enclosure calculator. More drivers from this manufacturer: Atlas Beyma.

Thiele-Small parameters

Nominal impedance8 Ω
Resonance frequency fs48 Hz
Total Q Qts0.38
Electrical Q Qes0.41
Mechanical Q Qms5.3
Equivalent volume Vas63.0 l
Moving mass Mms35.0 g
Cone area Sd380 cm²
Linear excursion Xmax6.7 mm
Displaced volume Vd256 cm³
Force factor BL11.65 Tm
DC resistance Re5.2 Ω
Voice coil inductance Le0.4 mH

Enclosure suggestion

The EBP of 117 suggests a bass-reflex enclosure. EBP = fs / Qes = 48 / 0.41

Sealed (Qtc 0.707)

Enclosure volume Vb
25.6 l
System resonance Fc
89 Hz
Cut-off frequency F3
89 Hz

Bass reflex (QB3 after Small)recommended

Enclosure volume Vb
51.7 l
Tuning frequency Fb
51 Hz
Cut-off frequency F3
52 Hz

Vb is the required net internal volume, Fb the tuning frequency of the reflex port and F3 the frequency at which the level has dropped by 3 dB. Calculated approximation after Small. A starting point for simulation, not a finished build plan.

Comparable drivers

Same size, same type, Qts within ±30 %.

Specifications

Allgemein
Manufacturer BEYMA
Category Coaxial
Series CX
Magnet Ferrite
Impedance (Ω) 8
Power handling (W) 300
Sensitivity (dB) 96.5
Frequency from (Hz) 50
Frequency to (Hz) 20000
Abmessungen & Korb
Diameter 10
Voice coil (inch) 1.75
Weight (kg) 5.1
Thiele-Small-Parameter
Re (Ω) 5.2
Le (mH) 0.4
Fs (Hz) 48
Qms 5.3
Qes 0.41
Qts 0.38
Vas (l) 63
Xmax (mm) 6.7
Vd (cm³) 256
BL (Tm) 11.65
Mms (kg) 0.035
Sd (m²) 0.038