BEYMA 18LEX1200Nd
BEYMA 18LEX1200Nd — 18" / 18 inch · Woofer · Subwoofer / Bass · Neodymium Magnet
1200 W AES - 98 dB - 40 – 1000 Hz - 8 Ω
Part no.: 42A-CHS-TT-BEY-0004
Documents
BEYMA 18LEX1200Nd — 18" · Woofer · Neodymium-Magnet
1200 W AES · 98 dB Sensitivity · Frequency range 40 Hz – 1000 Hz
Technical data
- Diameter: 18 "
- Voice coil: 4 "
- Power handling: 1200 W AES
- Sensitivity: 98 dB
- Impedance: 8 Ω
- Magnet: Neodymium
- Weight: 9 kg
- Mounting depth: 225 mm
- Frequency range: 40 – 1000 Hz
Series: LEX · Part no.: 42A-CHS-TT-BEY-0004
Beyma 18LEX1200Nd: 9 kg lightweight 18" woofer with BL 26.4 Tm and 1200 W AES
Strong motor, low weight: the Beyma 18LEX1200Nd combines a neodymium magnet with a 4" voice coil and reaches BL 26.4 Tm at 9 kg total weight. The 18" woofer from the LEX series handles 1200 W AES, has 98 dB sensitivity at 8 Ω and covers 40 to 1000 Hz.
Compared with softer-suspended subwoofer drivers it is tuned tighter: fs 36 Hz, Qts 0.33 and Vas 219 l. The low Qes of 0.35 with 200 g of moving mass shows how firmly the motor controls the cone. With 11 mm Xmax there is still enough excursion for solid deep-bass output, and the Qms of 10.9 indicates a mechanically low-loss suspension.
Use and enclosure
With EBP 103 the 18LEX1200Nd belongs in a vented enclosure. The guideline is 136 l tuned to 41 Hz with an f3 around 44 Hz – a manageable volume for an 18" that suits sub-tops and compact vented subs on stage. Sealed, 61 l with fc at 77 Hz results, which leaves little extension without equalisation and only makes sense with DSP boost. Mounting depth is 225 mm.
The combination of 9 kg and a 136 l guideline volume makes the driver attractive for touring subs where weight and packing size count. As a subwoofer, cross it far below 1000 Hz; the inductance of 1.7 mH then plays no role. A high-pass below the tuning frequency protects the 11 mm Xmax at full power. Other volumes and alignments are quick to run through the enclosure calculator at 42.audio.
What to look out for
- 8 Ω nominal, Re 5.3 Ω: an uncritical load for PA amplifiers.
- 9 kg thanks to neodymium: a real relief for touring cabinets.
- Mounting depth 225 mm with a 4" voice coil.
- Qts 0.33, EBP 103: vented with a 136 l guideline – sealed only with equalisation.
- Xmax 11 mm: plan a high-pass below the 41 Hz tuning.
Frequently asked questions
18LEX1200Nd or 18 Sound 18NLW4500?
Both have Qts 0.33 and a resonance around 35 to 36 Hz. The 18NLW4500 has a stiffer suspension with Vas 151 l and runs in an even smaller box, the 18LEX1200Nd with Vas 219 l lands at the 136 l guideline. 42.audio carries both drivers in the shop; the parameter comparison is in the driver database.
Does the 18LEX1200Nd work in a sealed enclosure?
The guideline is 61 l with fc at 77 Hz. For a subwoofer that is too little extension without equalisation; with DSP boost it works, but costs excursion and power. The 11 mm Xmax sets the limit there.
Which power amplifier suits the 18LEX1200Nd?
1200 W AES into 8 Ω is the continuous rating. An amplifier in that class into 8 Ω gets the most out of the driver; with 98 dB sensitivity, less is enough for high levels. Limiter and high-pass matter more than headroom.
Beyma 18LEX1200Nd: manufacturer, spellings and classification
Beyma and Acustica Beyma refer to the same manufacturer: Acústica Beyma S.L. of Moncada near Valencia, Spain. The 18LEX1200Nd is a 18-inch woofer with neodymium magnet from the LEX series, available from 42.audio, Beyma dealer in Germany, with datasheet and full specifications in the driver database.
At 42.audio you get the BEYMA 18LEX1200Nd with all key data in the driver database and the enclosure calculator. More drivers from this manufacturer: Atlas Beyma.
Thiele-Small parameters
| Nominal impedance | 8 Ω |
|---|---|
| Resonance frequency fs | 36 Hz |
| Total Q Qts | 0.33 |
| Electrical Q Qes | 0.35 |
| Mechanical Q Qms | 10.9 |
| Equivalent volume Vas | 219.0 l |
| Moving mass Mms | 200.0 g |
| Linear excursion Xmax | 11 mm |
| Displaced volume Vd | 1 cm³ |
| Force factor BL | 26.4 Tm |
| DC resistance Re | 5.3 Ω |
| Voice coil inductance Le | 1.7 mH |
Enclosure suggestion
The EBP of 103 suggests a bass-reflex enclosure. EBP = fs / Qes = 36 / 0.35
Sealed (Qtc 0.707)
- Enclosure volume Vb
- 61.0 l
- System resonance Fc
- 77 Hz
- Cut-off frequency F3
- 77 Hz
Bass reflex (QB3 after Small)recommended
- Enclosure volume Vb
- 112.9 l
- Tuning frequency Fb
- 44 Hz
- Cut-off frequency F3
- 48 Hz
Vb is the required net internal volume, Fb the tuning frequency of the reflex port and F3 the frequency at which the level has dropped by 3 dB. Calculated approximation after Small. A starting point for simulation, not a finished build plan.
Comparable drivers
Same size, same type, Qts within ±30 %.
- 18 Sound 18NLW4500fs 35 Hz · Qts 0.33 · Vas 151 l · in the shop
- 18 Sound 18W1300fs 35 Hz · Qts 0.33 · Vas 336 l · in the shop
- FaitalPRO 18HP1060fs 35 Hz · Qts 0.33 · Vas 184.4 l · in the database
- 18 Sound 18NTLS5000fs 37 Hz · Qts 0.33 · Vas 75 l · in the database
- FaitalPRO 18HW1070fs 32 Hz · Qts 0.33 · Vas 191.5 l · in the database
- FaitalPRO 18HP1030fs 35 Hz · Qts 0.32 · Vas 172.2 l · in the database
Specifications
| Allgemein | |
|---|---|
| Manufacturer | BEYMA |
| Category | Low Frequency |
| Series | LEX |
| Magnet | Neodymium |
| Impedance (Ω) | 8 |
| Power handling (W) | 1200 |
| Sensitivity (dB) | 98 |
| Frequency from (Hz) | 40 |
| Frequency to (Hz) | 1000 |
| Abmessungen & Korb | |
|---|---|
| Diameter | 18 |
| Voice coil (inch) | 4 |
| Mounting depth (mm) | 225 |
| Weight (kg) | 9 |
| Thiele-Small-Parameter | |
|---|---|
| Re (Ω) | 5.3 |
| Le (mH) | 1.7 |
| Fs (Hz) | 36 |
| Qms | 10.9 |
| Qes | 0.35 |
| Qts | 0.33 |
| Vas (l) | 219 |
| Xmax (mm) | 11 |
| Vd (cm³) | 1.3 |
| BL (Tm) | 26.4 |
| Mms (kg) | 0.2 |